HOW TO CONFIG CISCO LINKSYS E1200

HOW TO CONFIG

CISCO LINKSYS E1200


Here's a step-by-step guide on how to configure your Cisco Linksys E1200 wireless router:


Click For the Video: https://youtu.be/rociUrTx0Jk


Connect your computer to the router using another Ethernet cable, or use the default wireless network name (SSID) and password found on the label at the bottom of the router.

Go to Your web browser on your device and type "192.168.1.1" in the browser address bar. Then press enter.

Enter the necessary information for your Internet connection (e.g. PPPoE, DHCP, Static IP, etc.). If you are unsure of your Internet connection type, please contact your ISP for assistance.

Go To the Wireless tab and select the Wireless Settings option. Enter a name for your wireless network (SSID) and a password (Pre-shared Key). It's important to choose a strong password to secure your network.

Under the Wireless Security section, select the type of encryption you want to use. We recommend using WPA2-Personal as it is the most secure.

Click on Save and Done.

Your Cisco Linksys E1200 wireless router should now be configured and ready to use. You can now connect your wireless devices to the network using the SSID and password you have set.

Note: You can also configure other settings on your router, such as parental controls, port forwarding, and DHCP reservations. For more advanced configuration, please refer to the user manual or contact the Linksys support team.