Cisco Command Line -5

Cisco router IP enable command

Router>ena

Router>enable

Password:

Router#con

Router#confi

Router#configure ter

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#inter

Router(config)#interface fast

Router(config)#interface fastEthernet 0/1

Router(config-if)#ip address

Router(config-if)#ip address 192.168.4.1 255.255.255.0

Router(config-if)#no

Router(config-if)#no shut

Router(config-if)#no shutdown

                                                                             

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

Router(config-if)#exit

Router(config)#exit

Router#

                                                                 Write By Arman